NZ Shipping only $10 or spend over $149 for FREE NZ SHIPPING - Tracked trusted fast delivery

Quarry Boning Knife Working Pack (with Lockjaw Sheath)

$119.00

Narrow. Controlled. Bones out the quarry clean.

The Quarry is the boner, a slim, narrow blade that works close to the bone with control, so you strip a carcass easily. At around 11 inches overall it's long enough for reach and fine enough for the detail. NZ designed and field-tested for real Kiwi field-dressing.

NZ Shipping only $10 or spend over $149 for FREE NZ SHIPPING



Features

Type - Boning knife (slim narrow boner)
Blade steel - Stainless
Hardness - HRC 55/56
Grind - Taper grind
Blade length - 6" (152mm)
Overall length - ≈276mm / ≈10.9"
Blade thickness - 2.4–2.5mm
Handle - Polypropylene (PP)
Sheath - Lockjaw - custom thermoformed Kydex, waterproof
Designed - NZ designed & field-tested
Included Quarry knife + Lockjaw sheath

Description

Narrow. Controlled. Bones out the quarry clean.

The Quarry is the boner, a slim, narrow blade that works close to the bone with control, so you strip a carcass easily. At around 11 inches overall it's long enough for reach and fine enough for the detail. NZ designed and field-tested for real Kiwi field-dressing.

Under the system, the Quarry is the middle step, skin with the Vellum, bone with the Quarry, finish with the Brawler.

What makes this pack ideal is the Lockjaw sheath. It's thermoformed to the Quarry's exact profile, so a narrow blade that would rattle around in a generic sheath instead clicks in and holds tightly, it stays put no matter how you carry it.

Fully waterproof, so blood and water run straight off; no oiling, no rot, no fuss. Wipe it clean and it's ready. The working pack is tough but light. 

Value-built steel, done honestly: taper-ground high quality stainless, with a non-slip PP handle.

Why it earns its place

  • Holds secure - Lockjaw click retention keeps a narrow blade locked, not rattling.
  • Fully waterproof - blood and water run off. Wipe-clean, zero maintenance, fit for life.
  • Works tight to the bone - slim, narrow, controlled boning profile.
  • Reach where you need it - ~11" overall, fine in the detail.

Specs

Type Boning knife (slim narrow boner)
Blade steel High quality stainless
Hardness HRC 55/56
Grind Taper grind
Blade length 6" (152mm)
Overall length ≈276mm / ≈10.9"
Blade thickness 2.4–2.5mm
Handle Polypropylene (PP)
Sheath Lockjaw - custom thermoformed, waterproof
Designed NZ designed & field-tested
Included Quarry knife + Lockjaw sheath

The Quarry Working Pack gives you the knife and its custom Lockjaw sheath.

Reviews (0)

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Size Guide

Save More, Hunt More

Popular add on options

Upgrade with one of these combos

The Ultimate Combo
Get the Quarry Boning Knife, Lockjaw Sheath plus our Basic Belt Combo
Quarry Boning Knife Working Pack (with Lockjaw Sheath)
Quarry Boning Knife Working Pack (with Lockjaw Sheath)
Boning Knife and Lockjaw Sheath
$119.00
+
Basic Combo
Basic Combo
Just add your knife and fill the pouches with your essentials, you're ready to go.
$239.00
Separately $358
Bundle Price $308
SAVE $50.00

THE KNIFE FOR TIGHT BONING WORK

Narrow. Controlled. Bones out clean. The Quarry Working Pack gives hunters a slim boning knife and custom Lockjaw Sheath made for clean meat recovery, secure carry and easy maintenance in real hunting conditions.

MADE TO WORK TIGHT TO THE BONE
BONE | TRIM | RECOVER

MADE TO WORK TIGHT TO THE BONE

The Quarry is a slim, narrow boning knife designed for controlled work close to the bone. NZ designed and field tested for the way Kiwis actually hunt, the Quarry helps you strip a carcass clean without tearing good meat. The fine profile gives you control through detailed cuts, while the 6 inch stainless blade provides enough reach to work efficiently through the job. It is the knife you reach for when clean recovery matters and you want to make the most of the animal.

CONTROL WHERE IT COUNTS
NARROW | PRECISE | PRACTICAL

CONTROL WHERE IT COUNTS

Boning work needs a knife that feels accurate, steady and easy to guide. The Quarry’s slim blade profile helps you follow bone lines, work into tighter areas and make cleaner cuts with less waste. The taper ground stainless blade gives it a keen working edge, while the HRC 55 to 56 hardness and 2.4 to 2.5mm blade thickness provide dependable strength for regular hunting use. At around 276mm overall, the Quarry is long enough for reach but fine enough for detail, giving hunters a practical balance of control, usefulness and confidence in the hand.

SHEATHED SECURELY
LOCKS IN | WIPES CLEAN | WON’T RATTLE

SHEATHED SECURELY

The Quarry Working Pack comes with the custom Lockjaw Sheath, thermoformed to the exact profile of the knife for a firm, secure fit. A slim boning blade can rattle around in a generic sheath, but the Lockjaw Sheath keeps the Quarry seated properly. It clicks in, locks in place and stays put, so the knife carries securely through rough country. The sheath is fully waterproof, so blood, rain and water run straight off. There is nothing to oil, dry out or rot after a hard day out. Wipe it clean and it is ready for the next hunt.

Game Gear NZ

Quarry Boning Knife Working Pack (with Lockjaw Sheath)

$119.00

Narrow. Controlled. Bones out the quarry clean.

The Quarry is the boner, a slim, narrow blade that works close to the bone with control, so you strip a carcass easily. At around 11 inches overall it's long enough for reach and fine enough for the detail. NZ designed and field-tested for real Kiwi field-dressing.

Under the system, the Quarry is the middle step, skin with the Vellum, bone with the Quarry, finish with the Brawler.

What makes this pack ideal is the Lockjaw sheath. It's thermoformed to the Quarry's exact profile, so a narrow blade that would rattle around in a generic sheath instead clicks in and holds tightly, it stays put no matter how you carry it.

Fully waterproof, so blood and water run straight off; no oiling, no rot, no fuss. Wipe it clean and it's ready. The working pack is tough but light. 

Value-built steel, done honestly: taper-ground high quality stainless, with a non-slip PP handle.

Why it earns its place

Specs

Type Boning knife (slim narrow boner)
Blade steel High quality stainless
Hardness HRC 55/56
Grind Taper grind
Blade length 6" (152mm)
Overall length ≈276mm / ≈10.9"
Blade thickness 2.4–2.5mm
Handle Polypropylene (PP)
Sheath Lockjaw - custom thermoformed, waterproof
Designed NZ designed & field-tested
Included Quarry knife + Lockjaw sheath

The Quarry Working Pack gives you the knife and its custom Lockjaw sheath.

View product